Boiler repair in Oxford
Shared lets and older family systems keep Oxford boilers busy. Book a Gas Safe registered engineer and settle the repair price first.
Common boiler faults in Oxford
Oxford has plenty of shared and rented homes where boilers work hard, as well as family semis running older systems. The most common faults are losing pressure, no hot water from a combi, and conventional boilers with failing pumps or valves. Many are fixed in a single visit. If yours is old and unreliable, the engineer can price a replacement too, so you can compare.
Victorian terraces in Jericho and East Oxford: Many of these houses have been rented out over the years, and heavily used combis often show diverter valve and pressure faults.
Interwar semis in Headington, Cowley and Marston: Conventional systems with loft tanks still turn up, along with worn pumps and sticking three-port valves.
Flats and converted houses: Combis in flats most often lose pressure or fail on hot water. Some older flats still have electric storage heaters rather than gas.
Boiler repair prices in Oxford
| Job | Typical price | Typical visit |
|---|---|---|
| Diagnostic visit | £80 to £120 | about 1 hour |
| Pump, valve or fan replacement | £150 to £350 | 1 to 3 hours |
| Main circuit board (PCB) | £250 to £450 | 2 to 3 hours |
| Annual boiler service | £80 to £120 | about 1 hour |
Typical prices including VAT, checked October 2026. Your installer gives you a fixed price in writing before any work starts. More detail in our boiler repair cost guide.
Boiler over 12 years old?
Repeat repairs on an old boiler add up. Compare a fixed replacement price in Oxford before you pay for another part.
See boiler replacement optionsAreas we cover around Oxford
- Headington
- Cowley
- Jericho
- Summertown
- Marston
- Iffley
- Botley
- Kidlington
- Littlemore
- Wolvercote
Also nearby: Boiler repair in Reading, Boiler repair in Swindon, Boiler repair in Milton Keynes
Boiler repair in Oxford: questions
How much does a boiler repair cost in Oxford?
A diagnostic visit usually comes to £80 to £120. Parts like a pump, valve or fan typically cost £150 to £350 fitted, and a printed circuit board around £250 to £450. Your engineer gives you the price before starting.
I rent my Oxford flat. Who pays for the repair?
In most tenancies the landlord is responsible for keeping the boiler working and having it safety checked every year. Report the fault to your landlord or letting agent in writing. If you own the property, you arrange the repair yourself.
Should I fix my boiler or buy a new one?
Fix it if it is under 10 years old and only one part has failed. Consider a replacement if it is over 12, has broken down several times, or needs parts that are scarce.
What should I do if there is a gas smell?
Turn off the gas at the meter if it is safe to do so, open windows and get out. Do not use switches or flames. Call the National Gas Emergency Service on 0800 111 999 and wait for them to make it safe.