Heat pump installation in Bradford
Stone or cavity walls decide most of it. See where yours stand, then get a fixed price from an MCS certified Bradford installer.
Heat pumps in Bradford: what your walls mean
Whether a heat pump works here depends mainly on the walls. Cavity-wall semis with insulation are usually straightforward. Solid stone terraces and older villas can work too, but they need a careful heat loss survey, often bigger radiators, and a sensible spot for the outdoor unit. Some back-to-backs simply have nowhere to put one. For those, a new combi is usually the sensible route.
The Boiler Upgrade Scheme gives £7,500 off an air source heat pump. Your MCS-certified installer claims it and takes it off your bill.
Stone-built terraces and back-to-backs: Stone walls hold heat but lose it steadily, so expect a heat loss survey to call for larger radiators. Back-to-backs with no rear yard often have nowhere suitable for the unit.
Interwar and post-war semis: Among the better fits in the district when walls and loft are insulated, with room for the unit beside or behind the house.
Large Victorian stone houses: Possible, but high ceilings and solid walls raise the heat demand. A larger unit, bigger radiators or some underfloor heating may be needed, and conservation rules can apply.
Heat pump installation prices in Bradford
| Job | Typical price | Fitting time |
|---|---|---|
| Air source heat pump, before any grant | £11,000 to £14,500 | 2 to 5 days |
| After the £7,500 Boiler Upgrade Scheme grant | £3,500 to £7,000 | grant applied by installer |
| Radiator upgrades, if needed | £300 to £600 each | same visit |
| Hot water cylinder | usually included | same visit |
Typical prices including VAT, checked October 2026. Your installer gives you a fixed price in writing before any work starts. More detail in our heat pump installation cost guide.
Is a new boiler the better call?
In a draughty or hard-to-insulate Bradford home, a modern combi can still be the smarter buy. We will tell you straight.
See boiler replacement optionsAreas we cover around Bradford
- Heaton
- Manningham
- Shipley
- Saltaire
- Bingley
- Baildon
- Idle
- Eccleshill
- Thornton
- Wibsey
Also nearby: Heat pump installation in Leeds, Heat pump installation in Huddersfield, Heat pump installation in Wakefield
Heat pump installation in Bradford: questions
What does a heat pump cost in Bradford?
A typical air source heat pump comes to £11,000 to £14,500 before any grant. Once the £7,500 Boiler Upgrade Scheme grant is applied, most people pay about £3,500 to £7,000. Larger radiators, if your house needs them, are shown separately in the quote.
Do heat pumps work in solid stone houses?
They can, but stone walls lose more heat than insulated cavity walls, so the system has to be sized for that. Bigger radiators, draught-proofing or internal wall insulation in some rooms may be needed. If the numbers do not add up, a new boiler may be the better choice.
Will I get the £7,500 grant?
If you own the home, are replacing a gas, oil or other fossil-fuel system, have a valid EPC and use an MCS certified installer, you should qualify. Insulation is not a condition of the grant. Your installer makes the application.
Is planning permission needed for a heat pump in Bradford?
Most houses in England can fit an air source heat pump under permitted development if size and position rules are met. Conservation areas and listed buildings may need consent, so your installer checks this during the survey.